User Tools

Site Tools


mutil_ini_1.11

MUTIL.INI Mystic BBS 1.11 Final

This is the 'stock install' example of MUTIL.INI that ships with the final version of Mystic BBS 1.11

; MUTIL configuration file
; -------------------------------------------------------------------------
;
; MUTIL is an automated maintainance and utility program driven by
; configuration files used to perform various tasks upon execution.
;
; The syntax to execute MUTIL is: MUTIL <configuration file>.  If no
; configuration file is supplied, then the program will look for mutil.ini
; in the same directory.  A second parameter -NOSCREEN can be used to turn
; off screen updates but the configuration file parameter MUST be supplied
; ex: mutil mutil.ini -NOSCREEN
;
; Many different configuration files can exist to perform any series of
; tasks supported by MUTIL, or a single configuration can be maintained that
; does everything.  The minimum requirement is the General header with a
; task enabled, and then the specific header for that task that defines its
; options.
;
; Current abilities (enabled/disabled in the General header below):
;
;    - Export Binkley-style FLO echomail/netmail
;    - Import Binkley-style FLO echomail/netmail
;    - Import Message Bases (by datafile analysis)
;    - Import FIDONET.NA into Message bases
;    - Import FILEBONE.NA into File bases
;    - Mass upload files to all file bases (with FILE_ID.DIZ import and the
;      ability to exclude files by filemask)
;    - Generate Top 1 up to 99 Callers, Posters, Downloaders, Uploaders, PCR
;      Completely configurable output by using template files
;    - Import FILES.BBS into file bases
;    - Generate all files listing
;    - Purge Message bases (by age and max messages)
;    - Pack and renumber message bases
;    - Post text files to message bases
;    - Merge nodelists into Mystic format
;    - Toss TIC+files into BBS and to subscribed downlinks
;
; ==========================================================================
; ==========================================================================
; ==========================================================================

[General]

	; list of functions to perform on startup

	Import_FIDONET.NA  = false
	Import_MessageBase = false
	Import_FILEBONE.NA = false
	Import_FILES.BBS   = false
	MassUpload         = false
	GenerateTopLists   = false
	GenerateAllFiles   = false
	PurgeMessageBases  = false
	PostTextFiles      = false
	PackMessageBases   = false
	ImportEchoMail     = false
	ExportEchoMail     = false
	MergeNodeLists     = false
	FileToss           = false

	; Set this value if you want to run mutil from a directory other than
		; the root Mystic directory or the mysticbbs environment variable:

	; mystic_directory=c:\mystic\mystic.dat

	; If no directory is specified in the logfile name, mUtil will attempt
		; to use the configured LOGS directory from in Mystic's configuration.
		; Comment out to disable logging completely.

	logfile=mutil.log

	; Level 1 = basic
	; Level 2 = verbose
	; Level 3 = debug

	loglevel=2

		; logfile time stamp.  defaults to NNN DD HH:II:SS if not set here
		;logstamp = YYYYHHMMHHIISS

		; number of log files to keep (0 to disable log rolling)
		maxlogfiles = 3

		; size of each log file in kilobytes
		maxlogsize = 1000

; ==========================================================================
; ==========================================================================
; ==========================================================================

[Import_FIDONET.NA]

	; filename to import

	filename = fidonet.na

	; convert tags to lower case for message base filename  1=yes

	lowercase_filename = 1

	; The following options define the "default" values used when creating
	; any new message bases.  netaddress must match an exiting network
	; address configured within Mystic BBS.  default values are also
	; taken from the system configuration for origin line, colors, etc.

	netaddress     = 1:1/1
	acs_list       =
	acs_read       =
	acs_post       =
	acs_news       =
	acs_sysop      = s255
	header         = msghead
	read_template  = ansimrd
	index_template = ansimlst
	max_msgs       = 500
	max_msgs_age   = 365

	; true/false type values 0=false 1=true (newscan 2=forced)

	use_autosig    = 1
	use_realname   = 0
	kill_kludge    = 1
	private_base   = 0
	new_scan       = 1
	qwk_scan       = 1

	; value is either 0 for JAM or 1 for Squish

	base_format = 0

; ==========================================================================
; ==========================================================================
; ==========================================================================

[Import_FILEBONE.NA]

	; filename of filebone.na

	filename = filebone.na

	; root directory to create file paths under.  when a new filebone echo
	; is found, mUtil will create a file using "root_dir" + areatag.  So
	; for example if root is "c:\mystic\filebase\" and the areatag is
	; MYSTICBBS it will create "c:\mystic\filebase\MYSTICBBS".  This root
	; directory MUST exist.

	root_dir = c:\mystic\files\

	; convert tags to lower case for filebase base filename/dir 1=yes

	lowercase_filename = 1

	; Default values when creating a new file base

	dispfile     =
	template     = ansiflst
	acs_list     =
	acs_ftp      =
	acs_download =
	acs_upload   =
	acs_comment  =
	acs_sysop    = s255

	; true/false type values 0=false 1=true (newscan 2=forced)

	free_files    = 0
	show_uploader = 1
	new_scan      = 1

; ==========================================================================
; ==========================================================================
; ==========================================================================

[Import_FILES.BBS]

	; This function searches the filebase directories for existance of a
	; FILES.BBS file.  If the file is found, MUTIL will process all files
	; within it and upload any new files into the BBS using the description
	; from the FILES.BBS.  The files must physically exist in the same
	; directory as the FILES.BBS in order for them to be uploaded to the BBS

	uploader_name = Mystic BBS

	; for custom files.bbs importing.  desc_char is the character that denotes
	; extended description (blank = space).  desc_charpos is the position in
	; which the character exists.  desc_start is the position where the
	; description actually starts.

	desc_char    =
	desc_charpos = 1
	desc_start   = 14

	; erase files.bbs after processing?  0=no, 1=yes

	delete_after = 0

; ==========================================================================
; ==========================================================================
; ==========================================================================

[MassUpload]

	; this function searches all configured file directories for new
	; files and will upload them into the BBS.  It will attempt to
	; import FILE_ID.DIZ using the configured archivers if the option
	; is enabled.

	; Name to save has the uploader

	uploader_name = Mystic BBS

	; Import FILE_ID.DIZ?  1=yes

	import_fileid = 1

	; No description string used when no FILE_ID.DIZ is imported.

	no_description = No Description

	; Ignore list one file mask per line (allows * and ? wildcards)

	ignore = files.bbs
	;ignore = *.readme

; ==========================================================================
; ==========================================================================
; ==========================================================================

[GenerateTopLists]

	; Top list generator can generate up to top 99 for various different
	; statistics.  Each individual top file can be enabled or disabled and
	; can each have their own template files that are totally configurable.
	;
	; 1=enable for top_call, top_post, etc.
	;
	; The number of items in each list is determined by the template.  It
	; could be any number between 1 and 99.
	;
	; In the templates use @NA01-99 for name and @DA01-99 for numerical data
	; @DE returns the value set as _desc in the configuration.  You can look
	; at the provided template as an example.
	;
	; namelen and datalen define the width the MCI code is padded to
	;
	; exclude list is one name per line text file listing names which should
	; not be included in the generated output.  lines that begin with a ;
	; are considered comments.

	exclude_list = mutil.toplist.exclude.txt

	; User name for "no one" when for example you have 3 users and make a
	; top 10 list

	no_user = No one

	; Sort order.  You can use this to calculate top or bottom 99. 1=top

	sort_top=1

	; configuration for top callers generator
	; @NA=name  @DA=calls

	top_call          = 1
	top_call_template = mutil.toplist.txt
	top_call_output   = topcallers.asc
	top_call_desc     = Callers
	top_call_namelen  = 30
	top_call_datalen  = 10

	; configuration for top downloads
	; @NA=name  @DA=downloads

	top_dl          = 1
	top_dl_template = mutil.toplist.txt
	top_dl_output   = topdownload.asc
	top_dl_desc     = Downloaders
	top_dl_namelen  = 30
	top_dl_datalen  = 10

	top_ul          = 1
	top_ul_template = mutil.toplist.txt
	top_ul_output   = topupload.asc
	top_ul_desc     = Uploaders
	top_ul_namelen  = 30
	top_ul_datalen  = 10

	top_post          = 1
	top_post_template = mutil.toplist.txt
	top_post_output   = topposts.asc
	top_post_desc     = Posters
	top_post_namelen  = 30
	top_post_datalen  = 10

	top_pcr          = 1
	top_pcr_template = mutil.toplist.txt
	top_pcr_output   = toppcr.asc
	top_pcr_desc     = Posts Per Call
	top_pcr_namelen  = 30
	top_pcr_datalen  = 10

; ==========================================================================
; ==========================================================================
; ==========================================================================

[GenerateAllFiles]

	; Generate all files list

	; Path / filename of output filename.  If the path is not included then the
	; file will be created in whatever the current working directory is.

	filename = allfiles.txt

	; ideas/features for the future?
	; header, footer, baseheader, basefooter, exclude bases, uploader optional
	; uploader line, format list line 1st,2nd line, space between files?

; ==========================================================================
; ==========================================================================
; ==========================================================================

[PurgeMessageBases]

	; No options for this function

; ==========================================================================
; ==========================================================================
; ==========================================================================

[PackMessageBases]

	; No options for this function

; ==========================================================================
; ==========================================================================
; ==========================================================================

[PostTextFiles]

	; Total number of text files to be posted.  For each file there needs to
	; be a file definition as show below.

	totalfiles = 2

	; This defines one file which will be posted to the message base.  Each
	; file should be prefixed with file# where # is a number from 1 to
	; totalfiles.
	;
	; The delfile option (if true) will remove the filename after the message
	; is posted.  The baseidx is the permanent index of the message base to
	; post the message into (shown as Index at the top of the message base
	; editor in Mystic's configuration.  Address is the echomail destination
	; address

	file1_name    = myfile.txt
	file1_baseidx = 2
	file1_from    = Sysop
	file1_to      = All
	file1_subj    = My subject
	file1_addr    = 0:0/0
	file1_delfile = false

	file2_name    = myfile.txt
	file2_baseidx = 2
	file2_from    = Sysop
	file2_to      = All
	file2_subj    = My subject
	file2_addr    = 0:0/0
	file2_delfile = false

; ==========================================================================
; ==========================================================================
; ==========================================================================

[Import_MessageBase]

	; This option scans the message base directory, and creates any messages
	; bases inside of Mystic that have data files in the directory.

		search_subdirs = true

	; The following options define the "default" values used when creating
	; new message bases.  netaddress must match an exiting network
	; address configured within Mystic BBS.  default values are also
	; taken from the system configuration for origin line, colors, etc.

	netaddress     = 1:1/1
	acs_list       =
	acs_read       =
	acs_post       =
	acs_news       =
	acs_sysop      = s255
	header         = msghead
	read_template  = ansimrd
	index_template = ansimlst
	max_msgs       = 500
	max_msgs_age   = 365

	; network type (0=local, 1=echomail, 2=newsgroup 3=netmail)

	net_type = 1

	; true/false type values 0=false 1=true (newscan 2=forced)

	use_autosig    = 1
	use_realname   = 0
	kill_kludge    = 1
	private_base   = 0
	new_scan       = 1
	qwk_scan       = 1

; ==========================================================================
; ==========================================================================
; ==========================================================================

[ImportEchoMail]

	; If you want to save duplicated / bad messages to a certain message
	; base, then set this value to the *INDEX* of the message base (viewable
	; at the top of the msgbase editor).  Otherwise, set this value to -1
	; or leave it commented out and they will be ignored.

	; dupe_msg_index = 5

	; This defines the number of messages to keep in the duplicate database.
	; Each message takes 8 bytes of data, so for example 32,000 messages takes
	; 256kb of memory while importing messages.  Max is 250,000 messages.

	dupe_db_size = 32000

	; Toss packets from unsecure directory in addition to inbound?
	
	unsecure_dir = false

		; Strip SEEN-BY lines from messages when importing?

		strip_seenby = false

	; If you want to remap netmail from one user name to another, you can
	; define up to 50 remapped names below using the format <orig>;<new>
	;
	;forward = sysop;g00r00
	;forward = system operator;g00r00

	; If you want to twit filter names so that messages are not imported
	; or tossed to downlinks, then you can do one per line here, up to
	; 100.

	;twit=John Guillory
	;twit=kf5qeo
	;twit=1:396/60
	;twit=46:1/138

	; If you want MUTIL to auto create message bases when it finds an
	; echomail message for a non-existing base, set this value to true
	; and use the options below to define the default values

	auto_create = true

		; Convert filenames to lowercased 1=true

	lowercase_filename = 1
	; base format 0=jam 1=squish

	base_format    = 0
	acs_list       =
	acs_read       =
	acs_post       =
	acs_news       =
	acs_sysop      = s255
	header         = msghead
	read_template  = ansimrd
	index_template = ansimlst
	max_msgs       = 500
	max_msgs_age   = 365

	; true/false type values 0=false 1=true (newscan 2=forced)

	use_autosig    = 1
	use_realname   = 0
	kill_kludge    = 1
	new_scan       = 1
	qwk_scan       = 1

	; If you want to create settings specific to certain node addresses you can!
	; For example, if you want auto created bases that are linked to your AgoraNet
	; address of 46:999/999 then you can by prefixing with the address:

	;46:999/999_acs_list     =
	;46:999/999_acs_read     =
	;46:999/999_acs_post     =
	;46:999/999_acs_news     =
	;46:999/999_acs_sysop    = s255
	;46:999/999_use_realname = 0

; ==========================================================================
; ==========================================================================
; ==========================================================================

[ExportEchoMail]

	; no options

[MergeNodeLists]

	; Finds the latest nodelists and merges them together in the mystic data
	; folder.
	;
	; Set nodefile value one per line.  The value should contain the full path
	; and the base filename of the nodelist.
	;
	;   examples:
	;     nodefile=c:\nodelist\nodelist
	;     nodefile=c:\nodelist\agoranet
	;
	; The above example will search in c:\nodelist and select the latest
	; nodelist.### and agoranet.### nodelists.  This comparison is first done
	; by checking the day extension.  If the extension is archived (.z12, etc)
	; it will be unarchived before comparison.
	;
	; After decompressing, the 3-digit day extensions are compared, selecting
	; the highest number.  It will also compare the years of the file dates,
	; and select the newest option.  So if you have nodelist.025 dated 2013
	; and also nodelist.320 dated 2012, nodelist.025 will be selected.
	;
	; The same process is then be repeated for agoranet.### and once all of
	; the defined 'nodefiles' are processed, they will be merged together and
	; copied into Mystic's DATA folder so it can be used for nodelist lookups.
	;
	; If no nodelists are found, Mystic will not overwrite the current
	; nodelist.  Comments are stripped while merging to lower filesize and
	; increase search performance.

	; Strip nodes marked as DOWN?
	strip_down = true

	; Strip nodes marked as PRIVATE?
	strip_private = true

	nodefile=d:\nodelists\nodelist
	nodefile=d:\nodelists\agoranet

[FileToss]

	; Processes .TIC files from incoming directories and move/upload files to the
	; appropriate file bases (optionally creating them).  Files are then tossed
	; to the fileboxes of all downlinks connected to the file base.

	; Directory where failed files are moved, or comment out to disable archive of
	; failed files.  This includes incorrect file sizes, bad CRC, missing area
	; when auto-create is disabled, duplicate files, unsecured, etc.

	bad_dir=d:\mystic\files\badfile

	; Toss TIC from unsecure directory in addition to inbound?
	
	unsecure_dir = false

	; File description to use when no DIZ, long description or description can be
	; found from the file or .TIC file.

	no_desc=No Description

	; Name of the uploader to use when adding TIC files into the local file bases

	uploader=Mystic TIC

	; Check size and CRC values supplied in TIC file (if found) against the actual
	; file.  If the value does not match, then skip tossing the file (moving it
	; to the bad directory if enabled)

	check_crc  = true
	check_size = true

	; If this is true, then files that are FROM an unknown node will still be
	; processed.  If false, they will be moved to the bad directory or deleted
	; depending on configuration.  An "unsecure" node is one that is not directly
	; configured within your echomail nodes configuration.

	allow_unsecure = false

	; If this is true, then Mystic will allow the REPLACE TIC option, which will
	; remove and replace files by the specified file mask. 

	allow_replace = true

	; If true, then Mystic will attempt to autocreate file bases when a file is
	; found for an Area that does not already exist.  If an unknown file is found
	; and this option is disabled, the file will be considered a failure, and will
	; be ignored/moved to bad directory (if enabled)

	auto_create = true

	; The directory prefix for auto-created bases.  This will be used with the
	; areatag appended onto it, so for example if prefix was set to:
	;
	; dir_prefix=c:\bbs\files\fdn_
	;
	; And the areatag was "nodelist", Mystic would create and the use path:
	;   c:\bbs\files\fdn_nodelist\
	;
	; And the datafile would be fdn_nodelist

	dir_prefix = d:\mystic\files\fdn_

	; Auto create base options

	dispfile     =
	template     = ansiflst
	acs_list     =
	acs_ftp      =
	acs_download =
	acs_upload   =
	acs_comment  =
	acs_sysop    = s255

	; true/false type values 0=false 1=true (newscan 2=forced)

	free_files    = 0
	show_uploader = 1
	new_scan      = 1

	; Node-specific options allow some options to be overridden when a file is
	; coming from a specific node.  These options should be prefixed with the
	; address, examples for each supported option are listed below in comments

	;46:100/1_bad_dir       = d:\mystic\files\badfile_agoranet\
	;46:100/1_dir_prefix    = d:\mystic\files\agora_
	;46:100/1_allow_replace = true
	;46:100/1_acs_list      = s20g2
	;46:100/1_acs_ftp       = s20g2
	;46:100/1_acs_download  = s20g2
	;46:100/1_acs_upload    = s20g2
	;46:100/1_acs_comment   = s20g2
	;46:100/1_acs_sysop     = s255g2
mutil_ini_1.11.txt · Last modified: 2016/04/07 05:37 by avon