Differences

This shows you the differences between two versions of the page.

--- mutil_ini_1.12 [2017/06/25 03:07] – avon
+++ mutil_ini_1.12 [2023/01/20 01:39] (current) – mystic 1.12 A48 avon
@@ Line 1: / Line 1: @@
 ====== MUTIL.INI Mystic BBS 1.12 Alpha ======
-This is the current 'stock install' example of MUTIL.INI that ships with Mystic BBS 1.12 Alpha **32**
+This is the current 'stock install' example of MUTIL.INI that ships with Mystic BBS 1.12 Alpha **48**
   ; MUTIL configuration file
@@ Line 28: / Line 30: @@
   ;    - Import FIDONET.NA into Message bases
   ;    - Import FILEBONE.NA into File bases
+  ;    - Export FILEBONE.NA from File bases
+  ;    - Export AREAS.BBSfrom Message Bases
+  ;    - Export Golded Areas Configuration from Message Bases
   ;    - Mass upload files to all file bases (with FILE_ID.DIZ import and the
   ;      ability to exclude files by filemask)
@@ Line 40: / Line 45: @@
   ;    - Toss TIC+files into BBS and to subscribed downlinks
   ;    - Pack and check integrity of file base listings
+  ;    - Sort file base listings
   ;    - Perform message base echomail reply linking
+  ;    - Purge user database marking inactive users for deletion
+  ;    - Pack user database and remove private messages of deleted users
+  ;    - Automatically hatch a list of files to FDN
   ;
   ; The concept here is that you can create your own custom command lines to
@@ Line 57: / Line 66: @@
     Import_MessageBase = false
     Import_FILEBONE.NA = false
+    Export_FILEBONE.NA = false
+    Export_AREAS.BBS   = false
+    Export_GOLDED      = false
     Import_FILES.BBS   = false
     MassUpload         = false
@@ Line 69: / Line 81: @@
     FileToss           = false
     PackFileBases      = false
+    FileSort           = false
     LinkMessages	   = false
+          PurgeUserBase      = false
+          PackUserBase       = false
+          AutoHatch          = false
+    EchoNodeTracker    = false
     ; Set this value if you want to run mutil from a directory other than
-          ; the root Mystic directory or the mysticbbs environment variable:
+    ; the root Mystic directory or the mysticbbs environment variable:
     ; mystic_directory=c:\mystic\mystic.dat
     ; If no directory is specified in the logfile name, mUtil will attempt
-          ; to use the configured LOGS directory from in Mystic's configuration.
+    ; to use the configured LOGS directory from in Mystic's configuration.
-          ; Comment out to disable logging completely.
+    ; Comment out to disable logging completely.
     logfile=mutil.log
+    ; If set to TRUE (*HIGHLY* recommended for MUTIL) then it will write the
+    ; log file in increments of 8KB at a time.  If set to FALSE it will write
+    ; each individual line as it is logged.  This will significantly reduce
+    ; MUTIL performance if set to FALSE.
+    logcache=true
     ; Level 1 = basic
     ; Level 2 = verbose
     ; Level 3 = debug
+    ;
+    ; Note that the loglevel can also be set in a specific stanza and that value
+    ; will override the value defined here only for that specific stanza
     loglevel=2
-          ; logfile time stamp.  defaults to NNN DD HH:II:SS if not set here
+    ; logfile time stamp.  defaults to NNN DD HH:II:SS if not set here
-          ;logstamp = YYYYHHMMHHIISS
+    ; logstamp = YYYYHHMMHHIISS
+    ; Log roller type:
+    ;   0 = Do not roll log files
+    ;   1 = Roll by number of files/filesize
+    ;   2 = Roll by number of days
-    ; Log roller type 0=roll by number of files/size  1=roll by number of days
     logtype = 0
-          ; number of log files to keep (0 to disable log rolling)
+    ; number of log files to keep (0 to disable log rolling)
-          maxlogfiles = 3
+    maxlogfiles = 3
-          ; size of each log file in kilobytes
+    ; size of each log file in kilobytes
-          maxlogsize = 1000
+    maxlogsize = 1000
   ; ==========================================================================
@@ Line 134: / Line 166: @@
     use_autosig    = 1
     use_realname   = 0
-    kill_kludge    = 1
+          use_ansi       = 1
     private_base   = 0
     new_scan       = 1
@@ Line 161: / Line 193: @@
     root_dir = c:\mystic\files\
-    ; convert tags to lower case for filebase base filename/dir 1=yes
+    ; Use echotag for base description and FTP name
-    lowercase_filename = 1
+    use_echotag = false
+    ; Convert tags to lower case for filebase base filename/dir
+    ; True or 1 for yes, false or 0 for no
+    lowercase_filename = true
     ; Default values when creating a new file base
@@ Line 178: / Line 215: @@
     ; true/false type values 0=false 1=true (newscan 2=forced)
+    new_scan      = 1
     free_files    = 0
     show_uploader = 1
-    new_scan      = 1
+    anon_ftp      = 0
+  ; ==========================================================================
+  ; ==========================================================================
+  ; ==========================================================================
+  [Export_FILEBONE.NA]
+    ; Path/Filename of NA file to create
+    filename = filebone.na
+    ; Include only the following zones (separated by commas)
+    ; If commented out, all network bases that have an echotag and address
+    ; set will be exported
+    ; zones = 0,1,2,3,4
+  ; ==========================================================================
+  ; ==========================================================================
+  ; ==========================================================================
+  [Export_AREAS.BBS]
+    ; Path and filename to create
+    filename = areas.bbs
+    ; Only export Networked type message bases
+    net_only = true
+  ; ==========================================================================
+  ; ==========================================================================
+  ; ==========================================================================
+  [Export_GOLDED]
+    ; Path and filename to create
+    filename = goldedareas.txt
+    ; This is the value used in the group column when exporting
+    group = 0
+    ; If set to a non-zero value, only bases configured with a network
+    ; address that matches this zone will be exported
+    zone = 0
   ; ==========================================================================
@@ Line 190: / Line 272: @@
     ; This function searches the filebase directories for existance of a
     ; text-based file listing file (often known as FILES.BBS but other
-    ; formats can be imported as well
+    ; formats can be imported as well such as PCBoard format listings.
     ; The files must physically exist in the same directory as the file
@@ Line 210: / Line 292: @@
     ; Update existing files in the database, if their file sizes do not match?
     ; Both size and description will be imported
     update_files = false
@@ Line 220: / Line 303: @@
     ;
     ;   If the value is -1, then the importer will not look for a description on
     ;   the first line.
     ;
     ;   If the first description line is always at a specific character position
@@ Line 226: / Line 309: @@
     desc_first = 0
+    ; If you are importing a files.bbs that has a filename and description on a
+    ; single line Mystic will word wrap the description at 50 characters when
+    ; enabled.
+    desc_wrap = true
     ; DESC_CHAR: Defines the character identifier for an extended description line
@@ Line 257: / Line 346: @@
     import_fileid = 1
+    ; Rename filenames that are longer than the maximum allowed length
+    length_rename = true
     ; No description string used when no FILE_ID.DIZ is imported.
@@ Line 284: / Line 376: @@
     ; In the templates use @NA01-99 for name and @DA01-99 for numerical data
     ; @DE returns the value set as _desc in the configuration.  You can look
-    ; at the provided template as an example.
+    ; at the provided template as an example.  @RN01-99 can be used for the
+    ; user's real name instead of their login name.
     ;
     ; namelen and datalen define the width the MCI code is padded to
@@ Line 449: / Line 542: @@
     use_autosig    = 1
     use_realname   = 0
-    kill_kludge    = 1
     private_base   = 0
     new_scan       = 1
     qwk_scan       = 1
+          use_ansi       = 1
   ; ==========================================================================
@@ Line 459: / Line 552: @@
   [ImportEchoMail]
+    ; If you want bad packets that cannot be imported moved to a directory
+    ; then uncomment and set this value to an existing directory.
+    ; bad_packet = c:\mystic\echomail\badpkt
     ; If you want to save duplicated / bad messages to a certain message
@@ Line 472: / Line 570: @@
     dupe_db_size = 32000
+    ; Enable or disable circular PATH dupe checking.  This should be enabled
+    ; in 99.99% of cases and will default to true if commented out.
+    dupe_circular = true
     ; Toss packets from unsecure directory in addition to inbound?
-    unsecure_dir = false
+    unsecure_dir = true
           ; Strip SEEN-BY lines from messages when importing?
+    ; Note: This option should never be enabled if you current hub echomail
+    ; or plan to act as an echo echomail hub for other BBS systems in the
+    ; future.
           strip_seenby = false
+    ; Rescan command to use when someone does a full %RESCAN on all bases
+    ; This must be a valid command (ie R=<msgs> D=<days> or else the rescan
+    ; will refuse to perform any action.  The default is the last 250 messages
+    ; for each base.  Setting it to D=90 for example would give the last 90
+    ; days of messages.  If you want the default to send every message in the
+    ; base, then set it to go back a ridiculous number of messages R=999999999
+    default_rescan = R=250
     ; If you want to remap netmail from one user name to another, you can
     ; define up to 50 remapped names below using the format <orig>;<new>
+    ; Names are case insensitive.  Fowards can even forward to other systems
+    ; using the @address.
     ;
     ;forward = sysop;g00r00
     ;forward = system operator;g00r00
+    ;forward = g00r00;g00r00@1:123/123
     ; If you want to twit filter names so that messages are not imported
     ; or tossed to downlinks, then you can do one per line here, up to
-    ; 100.
+    ; 100.  Example:
     ;twit=John Guillory
@@ Line 502: / Line 620: @@
     auto_create = true
-          ; Convert filenames to lowercased 1=true
+    ; Use DOS 8.3 format filenames for JAM filename:
+    ;   0 = Disabled (use echo tag for filename)
+    ;   1 = Use shortened 8.3 filename (trimmed based on echo tag)
+    ;   2 = Use random hex 8.3 filename
-    lowercase_filename = 1
+    dos_filename = 0
+    ; Convert filenames to lowercase
+    lowercase_filename = true
     acs_list       =
@@ Line 520: / Line 644: @@
     use_autosig    = 1
     use_realname   = 0
-    kill_kludge    = 1
+          use_ansi       = 1
     new_scan       = 1
     qwk_scan       = 1
@@ Line 542: / Line 666: @@
     ; Do not export messages from users currently online
-    skip_online = true
+    skip_online = false
   [MergeNodeLists]
@@ Line 623: / Line 747: @@
     ; If this is true, then Mystic will allow the REPLACE TIC option, which will
     ; remove and replace files by the specified file mask.
     allow_replace = true
+    ; If true, Mystic will do a case insensitive filename scan on case sensitive
+    ; operating systems.  IE if the .TIC file has a filename of "TEST.ZIP" but
+    ; the actual filename on disk is "test.zip" Mystic will toss test.zip even
+    ; though technically they are not the same filename.  Note that enabling
+    ; this will cause some additional disk scanning during tossing to search for
+    ; files that have case variations.
+    ignore_case = true
     ; If true, then Mystic will attempt to autocreate file bases when a file is
@@ Line 637: / Line 770: @@
     ; areatag appended onto it, so for example if prefix was set to:
     ;
-    ; dir_prefix=c:\bbs\files\fdn_
+    ; dir_prefix=c:\mystic\files\fdn_
     ;
     ; And the areatag was "nodelist", Mystic would create and the use path:
-    ;   c:\bbs\files\fdn_nodelist\
+    ;   c:\mystic\files\fdn_nodelist\
     ;
     ; And the datafile would be fdn_nodelist
@@ Line 670: / Line 803: @@
     ;46:100/1_dir_prefix    = d:\mystic\files\agora_
     ;46:100/1_allow_replace = true
-    ;46:100/1_acs_list      = s20g2
+    ;46:100/1_acs_list      = s20z2
-    ;46:100/1_acs_ftp       = s20g2
+    ;46:100/1_acs_ftp       = s20z2
-    ;46:100/1_acs_download  = s20g2
+    ;46:100/1_acs_download  = s20z2
-    ;46:100/1_acs_upload    = s20g2
+    ;46:100/1_acs_upload    = s20z2
-    ;46:100/1_acs_hatch     = s20g2
+    ;46:100/1_acs_hatch     = s20z2
-    ;46:100/1_acs_sysop     = s255g2
+    ;46:100/1_acs_sysop     = s255z2
   [PackFileBases]
@@ Line 691: / Line 824: @@
   [LinkMessages]
+    ; This function has no options
+  [PurgeUserBase]
-  ; MUTIL configuration file
+    ; Mark users for deletion that haven't called in days.
-  ; -------------------------------------------------------------------------
+    ; This value cannot be less than 7
-  ;
-  ; MUTIL is an automated maintainance and utility program driven by
+    days = 180
-  ; configuration files used to perform various tasks upon execution.
-  ;
+  [PackUserBase]
-  ; The syntax to execute MUTIL is: MUTIL <configuration file>.  If no
-  ; configuration file is supplied, then the program will look for mutil.ini
+  [FileSort]
-  ; in the same directory.  A second parameter -NOSCREEN can be used to turn
-  ; off screen updates but the configuration file parameter MUST be supplied
+    ; Sort on which attribute (0=filename  1=size  2=date  3=downloads)
-  ; ex: mutil mutil.ini -NOSCREEN
-  ;
+    attribute = 0
-  ; Many different configuration files can exist to perform any series of
-  ; tasks supported by MUTIL, or a single configuration can be maintained that
+    ; Sort direction 0=Ascending (A to Z, 1 to 10)   1=Descending (Z to A, 10 to 1)
-  ; does everything.  The minimum requirement is the General header with a
-  ; task enabled, and then the specific header for that task that defines its
+    direction = 0
-  ; options.
-  ;
+  [AutoHatch]
-  ; Current abilities (enabled/disabled in the General header below):
-  ;
+          ; Files will be automatically hatched to connceted downlinks
-  ;    - Export Binkley-style FLO echomail/netmail
+          ; Each file must already exist in the file base.  The format
-  ;    - Import Binkley-style FLO echomail/netmail
+          ; file=<base ID or echotag> | filename | replaces filename (optional)
-  ;    - Import Message Bases (by datafile analysis)
-  ;    - Import FIDONET.NA into Message bases
+          file=nodelist | nodelist.z99 |nodelist.z99
-  ;    - Import FILEBONE.NA into File bases
+          file=3        | nodelist.z98
-  ;    - Mass upload files to all file bases (with FILE_ID.DIZ import and the
-  ;      ability to exclude files by filemask)
+  [EchoNodeTracker]
-  ;    - Generate Top 1 up to 99 Callers, Posters, Downloaders, Uploaders, PCR
-  ;      Completely configurable output by using template files
+    ; Automatically reset the echonode tracking statistics after a specific
-  ;    - Import FILES.BBS into file bases
+    ; number of days (or 0 to disable)
-  ;    - Generate all files listing
-  ;    - Purge Message bases (by age and max messages)
+    reset_stats = 0
-  ;    - Pack and renumber message bases
-  ;    - Post text files to message bases
+    ; Set the number of days of inactivity before an Echomail Node is
-  ;    - Merge nodelists into Mystic format
+    ; automatically deactivated (or 0 to disable)
-  ;    - Toss TIC+files into BBS and to subscribed downlinks
-  ;    - Pack and check integrity of file base listings
+    inactivity = 0
-  ;    - Perform message base echomail reply linking
-  ;
+          ; When a node is deactivated, should they also be unlinked from all
-  ; The concept here is that you can create your own custom command lines to
+          ; subscribed message/file bases?
-  ; complete any number of tasks.  For example, you could create msgmaint.ini
-  ; which executes message base purge, packing, and reply linking.  Then you
+          unlink = false
-  ; can simply execute "mutil msgmaint" to kick it off.
-  ; ==========================================================================
+    ; When set to TRUE, MUTIL will remove any files or mail packets from the
-  ; ==========================================================================
+    ; node's outbound queue upon deactivation from inactivity
-  ; ==========================================================================
+    clear_outbound = false
-  [General]
+    ; When Mystic is unable to connect outbound to a node it can automatically
-      ; list of functions to perform on startup
+    ; change their mail type and filebox settings from "Crash" to "Hold" after
+    ; a specific number of outbound connection failures combined with a specific
-      Import_FIDONET.NA  = false
+    ; number of days of outbound inactivity.  Setting either to 0 will disable
-      Import_MessageBase = false
+    ; this feature and both requirements must be met for action to be taken.
-      Import_FILEBONE.NA = false
-      Import_FILES.BBS   = false
+    crash_errors = 0
-      MassUpload         = false
+    crash_days = 0
-      GenerateTopLists   = false
-      GenerateAllFiles   = false
+  [EchoUnlink]
-      PurgeMessageBases  = false
-      PostTextFiles      = false
+    ; Echo must have existed for this many days to be considered for removal
-      PackMessageBases   = false
+    days_created = 30
-      ImportEchoMail     = false
-      ExportEchoMail     = false
+    ; Last post in base must be older than this to qualify for removal
-      MergeNodeLists     = false
+    days_inactive = 90
-      FileToss           = false
-      PackFileBases      = false
+    ; Set mode to: 0=Notify SysOp only  1=Delete bases only  2=Notify+Delete
-      LinkMessages	   = false
+    action_mode = 0
-      ; Set this value if you want to run mutil from a directory other than
+    ; Send Areafix unsubscribe to uplink when deleting message base
-          ; the root Mystic directory or the mysticbbs environment variable:
+    send_areafix = false
-      ; mystic_directory=c:\mystic\mystic.dat
+    ; Excluded echotag list.  These must always been listed at the bottom of the
+    ; stanza after all other options.  Excluded echotags can use wildcards and
-      ; If no directory is specified in the logfile name, mUtil will attempt
+    ; should be defined as one per line.
-          ; to use the configured LOGS directory from in Mystic's configuration.
-          ; Comment out to disable logging completely.
+    ; exclude=MYSTIC
+    ; exclude=FSX_*
-      logfile=mutil.log
-      ; Level 1 = basic
-      ; Level 2 = verbose
-      ; Level 3 = debug
-      loglevel=2
-          ; logfile time stamp.  defaults to NNN DD HH:II:SS if not set here
-          ;logstamp = YYYYHHMMHHIISS
-      ; Log roller type 0=roll by number of files/size  1=roll by number of days
-      logtype = 0
-          ; number of log files to keep (0 to disable log rolling)
-          maxlogfiles = 3
-          ; size of each log file in kilobytes
-          maxlogsize = 1000
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [Import_FIDONET.NA]
-      ; filename to import
-      filename = fidonet.na
-      ; convert tags to lower case for message base filename  1=yes
-      lowercase_filename = 1
-      ; The following options define the "default" values used when creating
-      ; any new message bases.  netaddress must match an exiting network
-      ; address configured within Mystic BBS.  default values are also
-      ; taken from the system configuration for origin line, colors, etc.
-      netaddress     = 1:1/1
-      acs_list       =
-      acs_read       =
-      acs_post       =
-      acs_sysop      = s255
-      header         = msghead
-      read_template  = ansimrd
-      index_template = ansimlst
-      max_msgs       = 500
-      max_msgs_age   = 365
-      ; true/false type values 0=false 1=true (newscan 2=forced)
-      use_autosig    = 1
-      use_realname   = 0
-      kill_kludge    = 1
-      private_base   = 0
-      new_scan       = 1
-      qwk_scan       = 1
-      ; value is either 0 for JAM or 1 for Squish
-      base_format = 0
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [Import_FILEBONE.NA]
-      ; filename of filebone.na
-      filename = filebone.na
-      ; root directory to create file paths under.  when a new filebone echo
-      ; is found, mUtil will create a file using "root_dir" + areatag.  So
-      ; for example if root is "c:\mystic\filebase\" and the areatag is
-      ; MYSTICBBS it will create "c:\mystic\filebase\MYSTICBBS".  This root
-      ; directory MUST exist.
-      root_dir = c:\mystic\files\
-      ; convert tags to lower case for filebase base filename/dir 1=yes
-      lowercase_filename = 1
-      ; Default values when creating a new file base
-      dispfile     =
-      template     = ansiflst
-      acs_list     =
-      acs_ftp      =
-      acs_download =
-      acs_upload   =
-      acs_hatch    =
-      acs_sysop    = s255
-      ; true/false type values 0=false 1=true (newscan 2=forced)
-      free_files    = 0
-      show_uploader = 1
-      new_scan      = 1
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [Import_FILES.BBS]
-      ; This function searches the filebase directories for existance of a
-      ; text-based file listing file (often known as FILES.BBS but other
-      ; formats can be imported as well
-      ; The files must physically exist in the same directory as the file
-      ; in order for them to be uploaded to the BBS.
-      ; Files that have have different file size in the database compared
-      ; to the physical file can also be updated with the new size and a new
-      ; file description, useful for using with external TIC processors.
-      ; The name of the file to look for in each directory
-      filesbbs=files.bbs
-      ; Upload name for files uploaded by this function
-      uploader_name = Mystic BBS
-      ; Delete the FILES.BBS file after processing
-      delete_after = false
-      ; Update existing files in the database, if their file sizes do not match?
-      ; Both size and description will be imported
-      update_files = false
-      ; The FILES.BBS format must be configured here using the following options
-      ;
-      ; DESC_FIRST: Defines how the first line of the file description is handled.
-      ;
-      ;   If the value is 0, the importer will expect for the file description to
-      ;   appear directly after the filename (ie, the second "word" on the line).
-      ;
-      ;   If the value is -1, then the importer will not look for a description on
-      ;   the first line.
-      ;
-      ;   If the first description line is always at a specific character position
-      ;   on the first line, then DESC_FIRST should contain the character position
-      desc_first = 0
-      ; DESC_CHAR: Defines the character identifier for an extended description line
-      ;            if this value is blank, it will mean a space.
-      desc_char =
-      ; DESC_START: Defines the character position of the extended description line.
-      ;             If a line contains the DESC_CHAR at the DESC_START position,
-      ;             then the importer will copy everything after that as an extended
-      ;             descripttion line.
-      desc_start = 14
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [MassUpload]
-      ; this function searches all configured file directories for new
-      ; files and will upload them into the BBS.  It will attempt to
-      ; import FILE_ID.DIZ using the configured archivers if the option
-      ; is enabled.
-      ; Name to save has the uploader
-      uploader_name = Mystic BBS
-      ; Import FILE_ID.DIZ?  1=yes
-      import_fileid = 1
-      ; No description string used when no FILE_ID.DIZ is imported.
-      no_description = No Description
-      ; Ignore list one file mask per line (allows * and ? wildcards)
-      ignore = files.bbs
-      ;ignore = *.readme
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [GenerateTopLists]
-      ; Top list generator can generate up to top 99 for various different
-      ; statistics.  Each individual top file can be enabled or disabled and
-      ; can each have their own template files that are totally configurable.
-      ;
-      ; 1=enable for top_call, top_post, etc.
-      ;
-      ; The number of items in each list is determined by the template.  It
-      ; could be any number between 1 and 99.
-      ;
-      ; In the templates use @NA01-99 for name and @DA01-99 for numerical data
-      ; @DE returns the value set as _desc in the configuration.  You can look
-      ; at the provided template as an example.
-      ;
-      ; namelen and datalen define the width the MCI code is padded to
-      ;
-      ; exclude list is one name per line text file listing names which should
-      ; not be included in the generated output.  lines that begin with a ;
-      ; are considered comments.
-      exclude_list = mutil.toplist.exclude.txt
-      ; User name for "no one" when for example you have 3 users and make a
-      ; top 10 list
-      no_user = No one
-      ; Sort order.  You can use this to calculate top or bottom 99. 1=top
-      sort_top=1
-      ; configuration for top callers generator
-      ; @NA=name  @DA=calls
-      top_call          = 1
-      top_call_template = mutil.toplist.txt
-      top_call_output   = topcallers.asc
-      top_call_desc     = Callers
-      top_call_namelen  = 30
-      top_call_datalen  = 10
-      ; configuration for top downloads
-      ; @NA=name  @DA=downloads
-      top_dl          = 1
-      top_dl_template = mutil.toplist.txt
-      top_dl_output   = topdownload.asc
-      top_dl_desc     = Downloaders
-      top_dl_namelen  = 30
-      top_dl_datalen  = 10
-      top_ul          = 1
-      top_ul_template = mutil.toplist.txt
-      top_ul_output   = topupload.asc
-      top_ul_desc     = Uploaders
-      top_ul_namelen  = 30
-      top_ul_datalen  = 10
-      top_post          = 1
-      top_post_template = mutil.toplist.txt
-      top_post_output   = topposts.asc
-      top_post_desc     = Posters
-      top_post_namelen  = 30
-      top_post_datalen  = 10
-      top_pcr          = 1
-      top_pcr_template = mutil.toplist.txt
-      top_pcr_output   = toppcr.asc
-      top_pcr_desc     = Posts Per Call
-      top_pcr_namelen  = 30
-      top_pcr_datalen  = 10
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [GenerateAllFiles]
-      ; Generate all files list
-      ; Path / filename of output filename.  If the path is not included then the
-      ; file will be created in whatever the current working directory is.
-      filename = allfiles.txt
-      ; ideas/features for the future?
-      ; header, footer, baseheader, basefooter, exclude bases, uploader optional
-      ; uploader line, format list line 1st,2nd line, space between files?
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [PurgeMessageBases]
-      ; No options for this function
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [PackMessageBases]
-      ; No options for this function
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [PostTextFiles]
-      ; Total number of text files to be posted.  For each file there needs to
-      ; be a file definition as show below.
-      totalfiles = 2
-      ; This defines one file which will be posted to the message base.  Each
-      ; file should be prefixed with file# where # is a number from 1 to
-      ; totalfiles.
-      ;
-      ; The delfile option (if true) will remove the filename after the message
-      ; is posted.  The baseidx is the permanent index of the message base to
-      ; post the message into (shown as Index at the top of the message base
-      ; editor in Mystic's configuration.  Address is the echomail destination
-      ; address
-      file1_name    = myfile.txt
-      file1_baseidx = 2
-      file1_from    = Sysop
-      file1_to      = All
-      file1_subj    = My subject
-      file1_addr    = 0:0/0
-      file1_delfile = false
-      file2_name    = myfile.txt
-      file2_baseidx = 2
-      file2_from    = Sysop
-      file2_to      = All
-      file2_subj    = My subject
-      file2_addr    = 0:0/0
-      file2_delfile = false
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [Import_MessageBase]
-      ; This option scans the message base directory, and creates any messages
-      ; bases inside of Mystic that have data files in the directory.
-          search_subdirs = true
-      ; The following options define the "default" values used when creating
-      ; new message bases.  netaddress must match an exiting network
-      ; address configured within Mystic BBS.  default values are also
-      ; taken from the system configuration for origin line, colors, etc.
-      netaddress     = 1:1/1
-      acs_list       =
-      acs_read       =
-      acs_post       =
-      acs_sysop      = s255
-      header         = msghead
-      read_template  = ansimrd
-      index_template = ansimlst
-      max_msgs       = 500
-      max_msgs_age   = 365
-      ; network type (0=local, 1=echomail, 2=newsgroup 3=netmail)
-      net_type = 1
-      ; true/false type values 0=false 1=true (newscan 2=forced)
-      use_autosig    = 1
-      use_realname   = 0
-      kill_kludge    = 1
-      private_base   = 0
-      new_scan       = 1
-      qwk_scan       = 1
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [ImportEchoMail]
-      ; If you want to save duplicated / bad messages to a certain message
-      ; base, then set this value to the *INDEX* of the message base (viewable
-      ; at the top of the msgbase editor).  Otherwise, set this value to -1
-      ; or leave it commented out and they will be ignored.
-      ; dupe_msg_index = 5
-      ; This defines the number of messages to keep in the duplicate database.
-      ; Each message takes 8 bytes of data, so for example 32,000 messages takes
-      ; 256kb of memory while importing messages.  Max is 250,000 messages.
-      dupe_db_size = 32000
-      ; Toss packets from unsecure directory in addition to inbound?
-      unsecure_dir = false
-          ; Strip SEEN-BY lines from messages when importing?
-          strip_seenby = false
-      ; If you want to remap netmail from one user name to another, you can
-      ; define up to 50 remapped names below using the format <orig>;<new>
-      ;
-      ;forward = sysop;g00r00
-      ;forward = system operator;g00r00
-      ; If you want to twit filter names so that messages are not imported
-      ; or tossed to downlinks, then you can do one per line here, up to
-      ; 100.
-      ;twit=John Guillory
-      ;twit=kf5qeo
-      ;twit=1:396/60
-      ;twit=46:1/138
-      ; If you want MUTIL to auto create message bases when it finds an
-      ; echomail message for a non-existing base, set this value to true
-      ; and use the options below to define the default values
-      auto_create = true
-          ; Convert filenames to lowercased 1=true
-      lowercase_filename = 1
-      acs_list       =
-      acs_read       =
-      acs_post       =
-      acs_sysop      = s255
-      header         = msghead
-      read_template  = ansimrd
-      index_template = ansimlst
-      max_msgs       = 500
-      max_msgs_age   = 365
-      ; true/false type values 0=false 1=true (newscan 2=forced)
-      use_autosig    = 1
-      use_realname   = 0
-      kill_kludge    = 1
-      new_scan       = 1
-      qwk_scan       = 1
-      ; If you want to create settings specific to certain node addresses you can!
-      ; For example, if you want auto created bases that are linked to your AgoraNet
-      ; address of 46:999/999 then you can by prefixing with the address:
-      ;46:999/999_acs_list     =
-      ;46:999/999_acs_read     =
-      ;46:999/999_acs_post     =
-      ;46:999/999_acs_news     =
-      ;46:999/999_acs_sysop    = s255
-      ;46:999/999_use_realname = 0
-  ; ==========================================================================
-  ; ==========================================================================
-  ; ==========================================================================
-  [ExportEchoMail]
-      ; Do not export messages from users currently online
-      skip_online = true
-  [MergeNodeLists]
-      ; Finds the latest nodelists and merges them together in the mystic data
-      ; folder.
-      ;
-      ; Set nodefile value one per line.  The value should contain the full path
-      ; and the base filename of the nodelist.
-      ;
-      ;   examples:
-      ;     nodefile=c:\nodelist\nodelist
-      ;     nodefile=c:\nodelist\agoranet
-      ;
-      ; The above example will search in c:\nodelist and select the latest
-      ; nodelist.### and agoranet.### nodelists.  This comparison is first done
-      ; by checking the day extension.  If the extension is archived (.z12, etc)
-      ; it will be unarchived before comparison.
-      ;
-      ; After decompressing, the 3-digit day extensions are compared, selecting
-      ; the highest number.  It will also compare the years of the file dates,
-      ; and select the newest option.  So if you have nodelist.025 dated 2013
-      ; and also nodelist.320 dated 2012, nodelist.025 will be selected.
-      ;
-      ; The same process is then be repeated for agoranet.### and once all of
-      ; the defined 'nodefiles' are processed, they will be merged together and
-      ; copied into Mystic's DATA folder so it can be used for nodelist lookups.
-      ;
-      ; If no nodelists are found, Mystic will not overwrite the current
-      ; nodelist.  Comments are stripped while merging to lower filesize and
-      ; increase search performance.
-      ; Strip nodes marked as DOWN?
-      strip_down = true
-      ; Strip nodes marked as PRIVATE?
-      strip_private = true
-      nodefile=d:\nodelists\nodelist
-      nodefile=d:\nodelists\agoranet
-  [FileToss]
-      ; Processes .TIC files from incoming directories and move/upload files to the
-      ; appropriate file bases (optionally creating them).  Files are then tossed
-      ; to the fileboxes of all downlinks connected to the file base.
-      ; Directory where failed files are moved, or comment out to disable archive of
-      ; failed files.  This includes incorrect file sizes, bad CRC, missing area
-      ; when auto-create is disabled, duplicate files, unsecured, etc.
-      bad_dir=d:\mystic\files\badfile
-      ; Toss TIC from unsecure directory in addition to inbound?
-      unsecure_dir = false
-      ; File description to use when no DIZ, long description or description can be
-      ; found from the file or .TIC file.
-      no_desc=No Description
-      ; Name of the uploader to use when adding TIC files into the local file bases
-      uploader=Mystic TIC
-      ; Check size and CRC values supplied in TIC file (if found) against the actual
-      ; file.  If the value does not match, then skip tossing the file (moving it
-      ; to the bad directory if enabled)
-      check_crc  = true
-      check_size = true
-      ; If this is true, then files that are FROM an unknown node will still be
-      ; processed.  If false, they will be moved to the bad directory or deleted
-      ; depending on configuration.  An "unsecure" node is one that is not directly
-      ; configured within your echomail nodes configuration.
-      allow_unsecure = false
-      ; If this is true, then Mystic will allow the REPLACE TIC option, which will
-      ; remove and replace files by the specified file mask.
-      allow_replace = true
-      ; If true, then Mystic will attempt to autocreate file bases when a file is
-      ; found for an Area that does not already exist.  If an unknown file is found
-      ; and this option is disabled, the file will be considered a failure, and will
-      ; be ignored/moved to bad directory (if enabled)
-      auto_create = true
-      ; The directory prefix for auto-created bases.  This will be used with the
-      ; areatag appended onto it, so for example if prefix was set to:
-      ;
-      ; dir_prefix=c:\bbs\files\fdn_
-      ;
-      ; And the areatag was "nodelist", Mystic would create and the use path:
-      ;   c:\bbs\files\fdn_nodelist\
-      ;
-      ; And the datafile would be fdn_nodelist
-      dir_prefix = d:\mystic\files\fdn_
-      ; Auto create base options
-      dispfile     =
-      template     = ansiflst
-      acs_list     =
-      acs_ftp      =
-      acs_download =
-      acs_upload   =
-      acs_hatch    =
-      acs_sysop    = s255
-      ; true/false type values 0=false 1=true (newscan 2=forced)
-      free_files    = 0
-      show_uploader = 1
-      new_scan      = 1
-      ; Node-specific options allow some options to be overridden when a file is
-      ; coming from a specific node.  These options should be prefixed with the
-      ; address, examples for each supported option are listed below in comments
-      ;46:100/1_bad_dir       = d:\mystic\files\badfile_agoranet\
-      ;46:100/1_dir_prefix    = d:\mystic\files\agora_
-      ;46:100/1_allow_replace = true
-      ;46:100/1_acs_list      = s20g2
-      ;46:100/1_acs_ftp       = s20g2
-      ;46:100/1_acs_download  = s20g2
-      ;46:100/1_acs_upload    = s20g2
-      ;46:100/1_acs_hatch     = s20g2
-      ;46:100/1_acs_sysop     = s255g2
-  [PackFileBases]
-      ; If true, MUTIL will check to make sure files exist, and will update their
-      ; file size in the listing, optionally removing missing files (remove_missing)
-      check_files = true
-      ; If true, MUTIL will remove any files which do not exist from the file
-      ; list database while checking integrity.  Otherwise they will be flagged as
-      ; OFFLINE in the file listing.  0 byte files are considered "missing"
-      remove_missing = false
-      [LinkMessages]